Using COMMAND CENTER
Printer Page
| This section includes settings that apply to the printing function of the machine, such | |
| as default print resolution or copy count. If the Admin password has been set, pages | |
| in this section are available only to the Administrator. | |
| Default printer settings will be overridden by the printer driver settings. Settings that | |
| affect the machine, such as locking the operation panel, are found under Basic | |
| page. | |
| Printer > Defaults > System | |
| The table below provides a summary of the items displayed on the Printer System | |
| page. | |
|
|
|
Item |
| Description |
|
|
|
Form Feed Timeout |
| Adjusts the timeout between 1 and 495 seconds, after which a form feed will |
|
| occur in the absence of data. The default setting is 30 seconds. |
|
|
|
Copies |
| Sets the number of copies to print. |
|
|
|
Page Orientation |
| Switches portrait or landscape page orientation. |
|
|
|
KIR Mode |
| Switches KIR smoothing On or Off. |
|
|
|
EcoPrint Mode |
| Switches EcoPrint On or Off to reduce the amount of toner used. The default |
|
| setting is Off. |
|
|
|
Resolution |
| Changes the printing resolution from 300 dpi, 600 dpi, and Fast1200. The default |
|
| setting is 600 dpi. |
|
|
|
| Printer > Media Input | |
| The Media Input page lets you configure paper trays by type and size. You can load | |
| different paper in the input trays and specify the type or size using COMMAND | |
| CENTER. | |
| You can also configure the input trays at the machine’s operation panel. Refer to | |
| Selecting the Paper Source on page | |
| To configure an input tray, click the Size drop down list and select the size which | |
| matches the paper you will use in the input tray. Click the Type drop down list and | |
| select the type which matches the paper. To specify the default input tray, click the | |
| appropriate radio button under Default. Click the Submit button to take settings in | |
| effect. | |
Item
Default
Tray
Size
Type
Description
Determines the default tray to feed paper from.
Displays the trays including those provided by option.
Sets the size for the input tray. For a full list of available sizes, refer to Paper Selection.
Sets the type for the input tray. For a full list of available types, refer to Paper Selection.
ADVANCED OPERATION GUIDE |
