Kyocera KM-1820 manual Machine Settings, Changing Function Defaults

System Settings

Machine Settings

Changing Function Defaults

System Menu/

Counter

Sor T

Function Default

Enter

For functions that you use often, changing the default value to the setting will minimize the time required to make that setting each time the corresponding function is used. The following table shows the functions for which the default values can be changed and their available settings. The factory default settings are shown with an asterisk (*).

Function		Available Settings	Reference
Scan Color Select		Full Color	page 2-5
		Grayscale
	*	Monochrome
Scan Resolution		200 x 100 Normal	page 2-6
	*	200 x 200 Fine
		200 x 400 Sup Fine
		300 x 300 dpi
		400 x 400 Ult Fine
		600 x 600 dpi
Original Quality	*	Text + Photo	page 1-2,page 2-
		Photo	5
		Text
Exposure		Auto	page 1-2,page 2-
	*	Manual	6
Zoom		Auto	page 1-3,page 2-
	*	100%	8
Collate		Off	page 1-5
	*	On
Orig. Placement		Top Edge to Rear	page 1-4,page 2-
	*	Top Edge to Left	8
File Name Entry		doc	page 1-11,page
			2-10
File Name Entry/Additional		None	-
Info.	*	Date and Time
		Job No.
1 Access Function Default.

If you are unsure how to use this route map refer to Accessing Menu Items on page vii.

2 Press S or T to select the default setting that you want to change and press Enter. The screen for the selected default setting is displayed.

3 Press S or T to select the new default setting and press Enter. The display shows Completed and returns to the Function Default screen.

ADVANCED OPERATION GUIDE 5-5