Hunter Fan 30987 manual Resetting the Air Sterilizer, Air Sterilizer Maintenance, Fault Indicator

Air Sterilizer Maintenance

Resetting the Air Sterilizer

In addition to the Pre-Filter and Main Filter Indicators, the Air Sterilizer has a red LED Fault Indicator. See Figure 11.

Fault Indicator

Fig. 11 - Fault Indicator

Should the Fault Indicator ever come on, reset the Air Sterilizer.

1.Turn off the Air Sterilizer.

2.Unplug the unit for 5 seconds.

3.Check the Pre-Filter and the Main Filter for excessive dirt accumulation. (Refer to Cleaning the Pre-Filter and Changing the Main Filter, pg. 7)

3.Plug the unit in, and turn it on.

4.If the Fault Indicator is still on, contact Hunter Fan Technical Support at 1-888-830-1326, or contact us over the internet at www.hunterfan.com.

11 43006-01