Troubleshooting
Problem | Solutions |
1. Unit does not | • Confirm that the unit is plugged in. |
operate. | • Check the installation of the |
| Filter, and the Top Cover. (See pgs. 8, 9, & 10.) |
2. Unusual noise; pop- | • Reset the Air Sterilizer. (See Resetting the Air |
ping, sizzling, etc. | Sterilizer, pg. 11.) |
| • Check the installation of the |
| Filter, and the Top Cover. (See pgs. 8, 9, & 10.) |
|
|
3. | • The |
Main Filter indicator | reached the estimated usage times. Check and |
is on. | clean the |
| if needed. (See pgs. 7 - 10.) |
|
|
4. Unit has reduced air | • The |
flow or increased | excessively dirty. Check and clean the |
noise. | and/or replace the Main Filter if needed. (See |
| pgs. 7 - 10.) |
5.Fault Indicator is on. • Check the installation of the
Filter, and the Top Cover. (See pgs. 8, 9, & 10.)
•Reset the Air Sterilizer. (See Resetting the Air
Sterilizer, pg. 11.)
•If the Fault Indicator remains on after resetting the Air Sterilizer, turn the unit off and contact Hunter Technical Support.
•The
Obtaining Replacement Main Filters
To obtain replacement Main Filters for your Air Sterilizer, first determine your model number by looking at the information label on the back of the Air Sterilizer. The model number will be listed on the label. Then, call
Hunter Air Sterilizer Model No.: | 30580, 30581, 30582 |
Replacement Main Filter No.: | 30987 |
CADR: | 300 |
Recommended Room Size: | 21 x 22 |
12 |