Operation
Initial Operation
NOTE: The power cord has a
ING PIN FROM THIS PLUG.
1.Remove the Air Sterilizer from its box and remove the clear plastic protective bag.
Place the unit on a firm level floor.
2.Make certain the Fan Speed Control Dial is in the Off position.
2.Plug the unit into a standard household electrical outlet.
3.Turn the Fan Speed Control Dial to Medium. (You can select your desired fan speed after you verify fan operation.) The Fan should begin operating and the Power LED should illuminate. Verify fan operation by placing your hand at the top/back of the unit. You should feel air moving. If the fan does not begin operating, go to the Troubleshoot- ing section on page 12 of this manual.
Note: Do not block the front of the unit. The area in front of the Air Sterilizer must remain open for proper air circulation.
Air Sterilizer Maintenance
Cleaning Your Air Sterilizer
NoteS:
•The Air Sterilizer must be unplugged during the cleaning process.
•Be sure the unit is completely dry before plugging in and using.
•Never immerse the unit in water.
Proper maintenance of your Hunter Air Sterilizer will help ensure years of trouble free service.
Follow these steps to properly maintain your Air Sterilizer:
1.Approximately every 90 days, the outside of the unit should be cleaned with a soft, damp cloth.
2.To determine when and how to clean the
Pre-Filter and Main Filter Information
To maintain proper sterilization performance, the
6 |