Pinnacle & Stardance Direct Vent - Rear Vent Gas Heaters
Optional Accessories
Fan Kits
FK28 Fan
The FK28 fan helps distribute heated air from within the firebox out into the room. The fan is controlled by a snapstat that turns power on and off as the firebox temperature rises above and falls below a preset temperature. A rheostat provides for variable fan speeds.
Specifications
115 Volt / 60Hz / .75 Amps
Maintenance
The fan itself does not require regular maintenance, however, periodic cleaning of the fan and the surrounding area is required.
Installation
Refer to Page 13 for installation instructions.
Remote Controls
The remote control allows you to turn the heater on or off from anywhere in the room. Refer to Page 40 for wiring diagrams.
Model | Functions Controlled |
MRC1 | ON/OFF |
MRC2 | ON/OFF and Temperature |
MRC3 | ON/OFF and Temperature control |
| with a digital display and a |
| programmable 24 hour clock |
IMT | Wall mounted thermostat control |
Screen Kit
An optional screen, S30SK, for use with the operable doors is available for the Stardance only. The screen is used when the doors are left in the open position.
Warming Shelf
Warming shelves add versatility to your stove; they can be used to keep foods warm at mealtime.
Model | Color |
2702 | Classic Black |
2704 | Red (Stardance only) |
2706 | Green (Stardance only) |
2711 | Moonlight Blue (Stardance only) |
2764 | Sand |
2765 | Midnight |
The shelf installation is done in three stages. First you attach the shelf loosely to the stove, leaving the screws loose enough to allow final adjustments. Then, you position the shelf and adjust the brackets so the shelf fits correctly. Finally, you tighten the screws.
Refer to the instructions included with each warming shelf for complete installation procedures.
42 | 20007066 |