Pinnacle & Stardance Direct Vent - Rear Vent Gas Heaters
Install the Log Set
Remove the logs from their packaging, and inspect each piece for damage. DO NOT INSTALL DAMAGED
LOGS.
1.Install the rear log by centering it side to side on the sheet metal shelf at the back of the firebox. (Fig. 43) The log will touch both sides and back wall of the firebox.
2.Install the right log by placing right side of log on burner so it is just touching firebox side. Lay log flat on burner almost touching the decorative grate. Then tilt log back so that it leans against rear log. (Fig. 43) Only the topmost part of the left side of log will touch the rear log. The right log sits freely on the burner and does not use locator pins to stay in place.
3.Place left log on burner, making sure to engage locator pins in holes in bottom of the log. (Fig. 43) This log does not touch any other log.
4.Sprinkle lava rock on burner in front of, and between, left and right logs. (Fig. 44)
Right Log
Rear Log
LG138 | Left Log | Decorative Grate |
Fig. 43 Install back, right and left logs.
Lava Rock
Decorative Grate | LG139 |
|
Fig. 44 Place lava rock on burner.
20007066 | 25 |
