Fujitsu P7120 Exiting from Main Menu, Serial ATA Port 0 Submenu of the Main Menu, Advanced, Boot

								M a i n M e n u
Serial ATA Port 0 Submenu of the Main Menu
					Note: Actual drive label shown may vary. Depending on the
The Serial ATA Port 0 submenu identifies which ATA/					drive type, information such as cylinders, heads and sectors
IDE devices are installed.					may also be displayed.
			PhoenixBIOS Setup Utility
	Main	Advanced	Security	Power		Boot	Info	Exit

Serial ATA Port 0 [MATSHITADVD-RAM UJ-832S-PATA]

Type:[Auto]]

Item Specific Help

Select Serial ATA/IDE drive installed here.

[Auto]

The BIOS auto-types the drive on boot time.

[None]

The drive is disabled.

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 3. Serial ATA Port 0 Master Submenu

F9 Setup Defaults

F10 Save and Exit

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Select Auto to have the type of Serial or Parallel ATA device automatically identified
	■	None		by the BIOS at POST. If None is selected, the following Set-up items do not appear.

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu. If you wish to move to another menu, use the cursor keys.

7