L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field | Options | Default | Description | |
|
|
|
|
|
LBA Mode | ■ | Disabled | [Enabled] | Enables or disables logical Block Addressing in place of Cylinder, Head, Sector |
Control: | ■ | Enabled |
| addressing. This option cannot be changed when Auto is selected. |
|
|
|
|
|
Transfer | ■ | Standard | [Multiword | Selects the method for moving data to/from the drive. Autotype the drive to |
Mode: | ■ | Fast PIO 1 | DMA 2] | select the optimum transfer mode. This option cannot be changed when Auto |
| ■ | Fast PIO 2 |
| is selected. |
| ■ | Fast PIO 3 |
|
|
| ■ | Fast PIO 4 |
|
|
| ■ | Multiword DMA 1 |
|
|
| ■ | Multiword DMA 2 |
|
|
|
|
|
|
|
Ultra DMA | ■ | Disabled | [Disabled] | Selects the method for moving data to/from the drive. Autotype the drive to |
Mode: | ■ | Mode 0 |
| select the optimum transfer mode. This option cannot be changed when Auto |
| ■ | Mode 1 |
| is selected. |
| ■ | Mode 2 |
|
|
| ■ | Mode 3 |
|
|
| ■ | Mode 4 |
|
|
| ■ | Mode 5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
■A bootable CD-ROM or DVD-ROM may have a floppy disk or hard drive format. When a bootable CD-ROM or DVD-ROM is used, drive allocations change automatically without changing the BIOS setup. If a floppy disk for- mat CD-ROM or DVD-ROM is used, the disc becomes Drive A. The CD-ROM or DVD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM or DVD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your applica- tion software will use the new designations.
■Be careful of the operating environment when booting from
6