0Video input terminal (VIDEO INPUT)
Connect this terminal to the video output terminal of your VCR or video disk player.
ASound2 input terminal (AUDIO2 INPUT)
Connect this terminal to the sound output terminal of your VCR, etc.
BExternal speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker. (Use a speaker with 4 to 16 Ω.)
When connecting cables L and R, attach a ferrite core (with wire clamper) to each of the cables. (See P.
* See the speaker instruction manual for more information.
CPower input terminal
Connect this terminal to the power cable supplied with the display.
D
Produces sound received through the sound input terminal.
Description of Input Terminals
RGB1 input terminal (RGB1
Pin No. | Input signal | Pin No. | Input signal |
|
|
|
|
1 | Red | 9 | — |
|
|
|
|
2 | Green | 10 | Ground |
|
|
|
|
3 | Blue | 11 | — |
|
|
|
|
4 | — | 12 | — |
|
|
|
|
5 | Ground | 13 | Horizontal (H) synchronization |
|
|
|
|
6 | Ground | 14 | Vertical (V) synchronization |
|
|
|
|
7 | Ground | 15 | — |
|
|
|
|
8 | Ground | Frame | Ground |
|
|
|
|
*Use the RGB1 synchronization switch to switch between TTL and ANALOG depending on the types of horizontal (H) and vertical (V) synchronization signals received through pins 13 and 14, respectively.
Pin No. | Signal |
|
|
1 | DCD (Data Carrier Detect) |
|
|
2 | RD (Received Data) |
|
|
3 | TD (Transmit Data) |
|
|
4 | DTR (Data Terminal ready) |
|
|
5 | GND (Ground) |
|
|
6 | DSR (Data Set Ready) |
|
|
7 | RTS (Request To send) |
|
|
8 | CTS (Clear To Send) |
|
|
9 | RI (Ring Indication) |
|
|
English