CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Be sure to turn OFF the power to the display and external equipment before making any connections.

No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.

RECEPTACLE

Make sure that the power cable’s grounding wire is grounded.

The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you will need to have it replaced. Contact your dealer for more information.

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT

Carefully check the terminals for position and type before making any connections.

Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals.

Replace the connector cover onto the display when you finish making the connections.

Terminal

Connector

 

 

VIDEO INPUT

BNC

 

 

S-VIDEO INPUT

S terminal

 

 

COMPONENT VIDEO INPUT

BNC x 3

 

 

RGB INPUT

mD-sub 15-pin

 

BNC x 5

 

 

AUDIO INPUT

Pin jack

 

 

RS-232C

D-sub 9-pin

 

 

Ferrite cores and wire clampers (PDS4213W-H only)

These ferrite cores and wire clampers are used to attenuate undesired signals.

Two ferrite cores and two wire clampers

When connecting a cable to component video input terminal, RS-232C terminal, attach one of these ferrite cores to the cable near the terminal as shown below. (PDS4213W-H only)

Ferrite core

Ferrite core

Wire clamper

Wire clamper

Ferrite cores (with wire clampers)

These ferrite cores with wire clampers are used to attenuate undesired signals.

Two ferrite cores (with wire clampers)

When connecting a cable to the external speaker output terminal, attach one of these ferrite cores to the cable near the terminal.

E-14