When rotating text (for installing the display with one of its sides facing down)

• Rotating text (OSD rotate)

All modes

You can use this option to rotate the text.

Each time you press or , one of the available choices appears in the following sequence:

-90 Deg. Normal +90 Deg.

-90 Deg.: Displays text from left to right when the display is installed with the power indicator lamp at the top.

Normal: Displays text normally.

+90 Deg.: Displays text from left to right when the display is installed with the power indicator lamp at the bottom.

When selecting automatic switching to desired mode

• Input mode of priority (Input priority)

All modes

You can use this option to switch between modes only when a signal is received through the selected input mode terminal. You cannot switch the input mode.

Each time you press or , one of the available choices appears in the following sequence:

Off Video S-video Comp.video RGB1 RGB2

Off: Switches between modes normally.

Other modes: Displays images when a signal is received through the selected input mode terminal.

*You cannot switch between RGB1 and RGB2. You cannot select the currently selected mode.

You cannot switch between input modes when you have selected a mode with this option.

English

When changing sound input

• Selecting input terminals (Audio input)

All modes

You can use this option to select one of the two available terminals to receive sound from input equipment.

1 Select “Audio input” and press

E N T E R

or .

The “Audio input” selection screen will appear.

2Press or to select input equipment.

3Select a desired input terminal.

Each time you press or , one of the available choices appears in the following sequence:

Audio 1 Audio 2 No audio

Audio 1, Audio 2: Selects Audio 1 or 2 for receiving sound in the corresponding mode.

No audio: No sound in the corresponding mode.

* Repeat steps 2 and 3 for each piece of input equipment.

4 Press

M E N U

when you finish to return to the Extended menu screen.

 

• Enabling 3D Y/C Circuit (3D Y/C)

V

Selects whether to use the 3D Y/C circuit.

Each time you press or , one of the available choices appears in the following sequence:

On Off

�

 

 

�

ｉｎｐｕｔ�

 

Ａｕｄｉｏ

１�

ＲＧＢ１

Ａｕｄｉｏ

ＲＧＢ２

Ａｕｄｉｏ

１�

Ｖｉｄｅｏ

Ａｕｄｉｏ

２�

Ｓ－ｖｉｄｅｏ

�

Ｃｏｍｐ．

Ａｕｄｉｏ

２�

ｖｉｄｅｏ�

２�

�

Ａｕｄｉｏ

 

 

�

 

 

�

 

 

�

 

 

ＭＥＮＵｒｅｔｕｒｎ�

ｓｅｌｅｃｔ�

�

�

“Audio input” selection screen

On: Enables the 3D Y/C circuit.

You can make this selection only for 3.58NTSC signal.

Off: Enables 3-line.

*On-screen information disappears if you do not take any action for 60 seconds.

*The following abbreviations used in this document represent input modes in which you can make adjustments:

V : Video mode, S : S-video mode, C : Comp.video mode, R1 : RGB1 mode, R2 : RGB2 mode

E-39