PART NAMES AND FUNCTIONS
Front
POWER
1
2
3
Control Panel
P O W E R | M O D E W I D E | MENU |
| VOLUME |
|
|
|
|
| ENTER | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1Power indicator lamp
This lamp shows whether the main power is ON or OFF, as follows:
Lit (red): | Standby |
Lit (green): Power ON
Lit (orange): Power saving (DPMS: Power saving function) mode ON
Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P.
2Remote control signal receiver
Receives signals from the remote control.
3Main Power Switch Indicator
Indicates the location of the Main Power switch, at the bottom of the display.
4Power button [POWER]
Turns the power ON or OFF when the main power switch, provided at the bottom of the display, is ON.
45 6 7 8 9 0
The control panel opens when you press the lower center of the display.
If you press the display again, the control panel closes.
5Input mode selector button [MODE]
Switches between image input modes.
6Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
7Menu button [MENU]
Displays image and sound adjustment menus.
8Volume adjustment buttons [VOLUME
Adjust the volume.
Note: The [
/ 
] buttons can also be used to scroll through the options when a menu is displayed.
9Adjustment buttons [
/ 
]
The [
/ 
] buttons can also be used to scroll through options in a menu, or to change values.
0 Set button [ENTER]
Press this button to finalize the selection of a desired option in a menu.
Warning
The protective circuit built into the display automatically turns the power to OFF if the display has an internal problem. At this time, the power indicator blinks red, indicating that the display is somehow faulty. If you continue using the display as is, fire or electric shock may result. Be sure to first remove the power plug from the receptacle and to contact your dealer immediately.