INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the (optionally available) stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer performs the actual installation.

See the appropriate instruction manual for more information on the installation hardware you select.

To ensure proper heat radiation, provide at least as much space around the display as shown below.

*Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.

*Never attempt to tilt the display sideways or backward.

*To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.

*The display can be installed with either of its sides facing down.

When using the stand

Front

 

Side

Upper

(cm)

(cm)

 

 

1.5

10

 

 

10

10

Wall

Left

Right

 

 

6

 

Floor

 

Floor

English

When using the wall-mounting unit (horizontal type)

Front

 

Side

 

(cm)

(cm)

Upper

 

Wall mounting unit

10

 

 

10

10

 

Left

Right

Wall

 

 

6

Lower

1.5

When using the wall-mounting unit (vertical type)

FrontSide

Upper

(cm)

(cm)

 

10

 

Wall mounting unit

 

 

 

 

 

10

10

 

Left

Right

Wall

 

 

10

Lower

1.5

* When you install the display lengthwise (rather than in its normal position), you need to adjust the display so that characters will appear properly.

(See P. E-38–E-41 for extended features.)

Note

Grounding work is necessary if the receptacle is intended for exclusive use in the two-wire circuit.

Reference

See P. E-44 for more information on options.

E-7