54
6Double-click LAN adapter icon.
"Properties" appears.
7Click the [Driver] tab and click [Update Driver].
The [Hardware Update Wizard] window appears.
When the [Can Windows connect to windows Update to search for software?] message
appears, select [No, not this time] and click [Next].
8Select [Install the software automatically (Recommended)] and
click [Next].
9Click [Finish].
10 Click [Close].
`Click [Advanced] tab, and change the value in [Adaptive Inter Frame Spacing] to
[On] if it is [Off].
11 Restart the system.
For LAN card names displayed in the [Device Manager] after the driver installation, refer to "2.4
Displayed LAN Card Names" (Jpg.56).
Referring to "1.2 Module Version Level" (Jpg.51), check that the drivers updated for all LAN
adapters are correctly updated and that the version is correct.
`[Ethernet controller] may be displayed in [Other devices]. This driver is not
available for a port that uses a LAN controller other than Intel.
`A virtual adapter exists if AFT has been created, but do not select it.
`Install [Ethernet controller] after installation of other LAN adapters is
completed.
`[This device cannot start. (Code 10)] may be displayed, but this is not a
problem since the system will operate normally after reboot. After pressing
[Finish], [Help and support center] appears. Click the [x] on the upper right
in the window.
`Do not set a small value in the [Receive Descriptors] in the LAN adapter properties.