6 VLAN 73
E
6.2 Creating VLAN
Perform the following procedures to create a VLAN.
1Set the port of the switch connected to the LAN port to enable
send/receive of VLAN tag frames.
2Log on with administrator privileges.
3Double-click the LAN adapter to configure VLAN using device
manager, and start Intel® PROSet.
J" How to Start Intel® PROSet"(pg.60)
4Click the [VLANs] tab.
VLAN cannot be set to the adapter configuring team.
5Click [New].
6Set [VLAN ID] and [VLAN name], then click [OK].
[VLAN ID] must be the same as the set values on the switch. The available range to set is 1 to
4094.
[VLAN name] does not need to be the same as the setting on the switch.
7Click [OK] and close the property window of the LAN adapter.
8Restart the system.
Check the version level of the driver version of the created VLAN (virtual adapter) referring
to "1.2 Module Version Level" (Jpg.51).
When VLAN settings are completed, the following virtual adapter is created.
(LAN adapter name) - VLAN: (VLAN name)
Upper layer protocol is bound to this virtual adapter.
It cannot bind to LAN card configuring VLAN.
IP address is set in this virtual adapter.