OPERATION
Room temperature sensor selection
Indoor unit
Press the ECONOMY button for more than 2 seconds to se- lect whether the room temperature is detected at the indoor unit (remote sensor) or the remote controller.
When the 
thermo sensor display appears, the room temperature is detected at the remote controller.
NOTES
•This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service personnel when using this function.
•If this function is locked, the location where the room temperature is detected cannot be changed and the 
mark flashes when the ECONOMY button is pushed for 2 seconds or more.
Child lock function
Press the DAY (DAY OFF) button and SET button simul- taneously for 2 seconds or more to activate the child lock function and lock all buttons on the remote controller. Press the buttons again for 2 seconds or more to deacti- vate the child lock function.
When the child lock function is activated, the 
mark appears. If any button is pressed during the child lock, the
CL display and 
flash.
5
