Fujitsu S1300 Scan Test, 1.Pull up the extension, 5. Check the ScanSnap Manager icon, 1. Load a document in the ScanSnap, DThe ScanSnap Manager icon appears in the Dock

5. Check the ScanSnap Manager icon.DThe ScanSnap Manager icon appears on the taskbar.zThe icon varies depending on the power source to be used.

For power cable connection:

For USB bus power cable connection:

zIt may take a few moments until the ScanSnap is ready to be used, and the ScanSnap Manager icon changes to or to in the taskbar.

In Microsoft® Windows® 7, the ScanSnap Manager icon is displayed in the menu

which appears when you click in the taskbar.

Drag and drop the ScanSnap Manager icon onto the taskbar to have the icon always displayed in the taskbar.

DThe ScanSnap Manager icon appears in the Dock.

Scan Test

After installing the software and connecting the ScanSnap and computer, use ScanSnap Manager and check that documents can be scanned.

The following procedure is described with the Quick Menu scanning method. For other scanning methods, refer to the Operator’s Guide.

1. Load a document in the ScanSnap.1.Pull up the extension.

Extension

2.Slide open the side guides of the right and left.

Side Guides

zThe icon varies depending on the power source to use.

For power cable connection:

For USB bus power cable connection:

zIt may take a few moments until the ScanSnap is ready to be used, and the ScanSnap Manager icon changes to or to in the Dock.

DConnecting the ScanSnap to your computer is complete. Proceed to "Scan Test" (page 7).

3.Load the document on the ADF paper chute (cover), and adjust the side guides to the size of the document.

Set the document face-down and top-first

7