Fujitsu TX200FT S2

4Checking location before installing the server

nConditions

��

■Installing the server to the rack

Make sure to contact an ofce listed in the " Contact Information" before at tempting to install or remove the serv-

er from the rack.

1Remove the inner rail from the slide

rail.

Pull out the inner rail while pu shing on the lock.

2Attach the inner rails to the right and

left side of the server.

Secure the inner rails to 3 plac es on both the right

and left side of the server using M4 screws.

3Open both the front and rear doors of

the rack.

4Decide where to attach the slide rail

and rack nuts.

Choose the height at which to place the server i n

the rack by aligning the base of the sever with o ne

of the narrower spaces (Refer to the gu re below)

in the rack bracket.

��

�

��

Inner rail

M4 screws

* Also secure the o

osite side in the same way