6
n Validation interval at automatic shutdown
This setting required for the use of UPS.
For details about various settings , refer to "3.4 UPS Settings" in the "User's Guid e". The numbers in brackets ( ) are setti ng
examples.
Item Actual Setting Parameters Time
Validation interval from the power failure
to the start of FTvirtual Server shutdown
"Power Failure" - "When power fails, begin a shutd own
procedure:" - "After UPS has been on batter y for" in
Device Properties.
minutes
(1 min)
Validation interval from the start of FTvirt ual
Server shutdown to the start of CoSe rver
shutdown (Command le execution time)
Select Device properties "Sh utdown Sequence" -
"Congure Shutdown Sequence" - "Nex t" - "OS" and
then "Delay".
minutes
(3 mins)
Validation interval from the start of Co Server
shutdown to UPS power off (time required for
OS shutdown)
Select Device properties "Sh utdown Sequence" -
"Congure Shutdown Sequence" - "Nex t" - "OS" and
then "Duration".
minutes
(1 minute
30 seconds)
Total
minutes
seconds
(5 minutes
30 seconds)
n Network conguration
CoServer Link1, CoServer Link2, Vi rtual Network1 and Virt ual Network2 are inter nal network settings. Nor mally modi-
cations are not required.
However, when there is a conict with an external ne twork, refer to "3.2 Network Functions" in the "Use r’s Guide" before
setting. Figures in the brackets ( ) a re default values.
Item FTvirtual Server
IP address Subnet mask
Computer name
Local area connection (FTvirtual Se rver LAN)
.
.
. .
.
.
Virtual Network1 (192 . 168 . 181 . 81) (255 . 255 . 255 . 252)
Virtual Network2 (192 . 168 . 181 . 85) (255 . 255 . 255 . 252)
Item CoServer1 (FT1) CoServer2 (FT2)
IP address Subnet mask IP address Subnet mask
Computer name
CoServer Management
(CoServer LAN)
.
.
.
.
.
.
.
.
.
.
.
.
CoServer Link1 (
192 .168 .181 . 89
) (
255 .255 .255 .252
) (
192 .168 .181 . 90
) (
255 .255 .255 .252
)
CoServer Link2 (
192 .168 .181 . 93
) (
255 .255 .255 .252
) (
192 .168 .181 . 94)
(
255 .255 .255 .252
)
Virtual Network (
192 .168 .181 . 82
) (
255 .255 .255 .252)
(
192 .168 .181 . 86
) (
255 .255 .255 .252
)
When setting, the FTvirtual Server L AN adapter appears (Redirected 0 ) on the CoServer, but it is reserved bec ause it is
used by the FTvirtual Server.
Do not bind internet protocol (TCP/I P) and do not set IP addresses or subnet masks to these ad apters on the CoServer.
Set the FTvirtual Server LAN IP addres s and the subnet mask on the FTvirtual Serve r.