10
9Connecting the remaining LAN cables
After turning off the server, connect the remaining LAN cables as described below.
In the FT-system, all FTvirtual Server LAN (application data transmission), CoServer Link, and CoServer LANs
are used to control the system so it is important not to forget to connect the CoServer LAN cable to a HUB.
●Connecting the LAN cables
���������������������
��������������������������������
������������
���
10 Pre-operation settings
After running mini-setup of the OS, refer to the
following and perform FT-system settings.
������������
"Chapter 3 Pre-operat ion Settings"
When using UPS, perform UPS settings.
������������
"3.4 UPS setting"
For details about maintenance after operations have
started, refer to "User's Guide Chapter 7 Operation
and Maintenance".
11 Support and Service
lPRIMERGY information
The latest PRIMERGY, driver, and software i nformation is
available at the address below. Use as necessar y.
http://primergy.fujitsu.com
lBefore requesting repairs
If an error occurs in thi s server, refer to "User's Guide 7.2
Troubleshooting". If problems can still not be solved, con-
tact an ofce listed in the "Contac t Information".
When contacting the ofce list ed in the "Contact Informa-
tion", inform them of the product ID and manufac tures
number which are detailed on labels on the b ase of the
server.
����������
�������������������
�������
���������������������
�
���
�
��