Fujitsu Remote Controller, UTB-UUB manual Function Information

FUNCTION INFORMATION

Depending on the indoor unit model, some buttons on this remote controller cannot be used and some functions are re- stricted.

Refer to the following table for the buttons that can be used for each model.

: Button can be operated

: Button cannot be operated

Button numbers (refer to page 1)

	Model	1 2 3 4 5 6 7 8 9 0 A B C D
*1	Wall Mounted Type			*7
*2
	(I.A.Q. Model)
*3
*2	Wall Mounted Type			*7
*3
	Wall Mounted Type		*5	*6
	(AIRSTAGE Model)
	Duct type	*4	*5	*6
	Cassette Type		*5	*6
	Floor/Ceiling		*5	*6
	Universal Type
	Ceiling Wall Type		*5	*6

If a button indicated with “” is pressed, the operation lock display (I on page 1) flashes, but the air conditioner will not respond.

*1: Air clean operation is always on during air conditioner operation and cannot be turned off.

*2: If the wired remote controller is connected to the indoor unit, a wireless remote controller cannot be used.

*3: Before connecting the remote controller, the remote controller cord must be modified.

*4: The fan speed cannot be changed for some large, duct-type indoor units.

*5: This button cannot be operated for the AIRSTAGE S-series remote controllers.

*6: This button cannot be operated for the AIRSTAGE J-series and V-series remote controllers.

*7: This button cannot be operated if the indoor unit has manually-operated horizontal airflow direction louvers.

En-2