Fujitsu Siemens Computers B3000 manual Boot Menu - Selecting The Operating System Source

B o o t M e n u

BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE

The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the instructions for Navigating Through The Setup Utility to make any changes.

The following tables show the names of the menu fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the field's function and any special information needed to help understand the field's use.

		PhoenixBIOS Setup Utility
Main	Advanced	Security	Power Savings		Boot
Quick Boot:			[		Item Specific Help
				Enabled]
Boot Time Diagnostic Screen:			[Disabled]
Preboot Execution Environment:			[Disabled]		[Disabled]
					All diagnostic tests
▲ Boot Device Priority
					will be done.
					[Enabled]
					Some diagnostic tests
					may be skipped while
					booting to speed up.

F1 Help	Select	Item
ESC Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

Figure 15. Boot Menu

F9 Setup Defaults

F10 Save and Exit

Table 15: Fields, Options and Defaults for the Boot Menu

Menu Field	Options	Default	Description
QuickBoot:	• Disabled	[Enabled]	Turns on and off booting with a truncated set of Power On
	• Enabled		Self Test. (Fewer tests mean faster turn on.)
Boot-time	• Disabled	[Disabled]	Turns on and off display of test results instead of Fujitsu
Diagnostic Screen:	• Enabled		logo screen during Power On Self Test.
Preboot Execution	• Disabled	[Disabled]	When enabled, booting from a network server (Preboot
Environment:	• Enabled		Execution Environment) is enabled.
Boot Device	• Selects the Boot	—	This menu allows setting up the source for the operating
Priority	Device Priority		system.
	submenu

23