minidock.fm Page 2 Tuesday, August 21, 2001 3:30 PM
■Video Port
Used for connecting a video monitor for displaying the contents of the pen tablet screen.
■Floppy Disk Drive Port
Used for connecting the optional floppy disk drive.
■PS/2-style Keyboard Port
Used for connecting a PS/2-style keyboard connector.
■ LAN Port
Used for connecting the pen tablet’s optional internal LAN module to a LAN hub.
Notes: The mini-dock is required in order to use the internal LAN module; there is no LAN port on the pen tablet.
A ferrite core is supplied with the mini-dock. To comply with FCC Class B requirements, use the ferrite core on the LAN cable (not supplied). Installation instructions are included in the ferrite core packaging.
■USB Port
Used for connecting Universal Serial Bus-compliant devices.
The viewing angle of the mini-dock can be adjusted to four different positions. The bottom of the support bail on the rear of the support platform (see Figure 3) snaps into one of four slots. When storing the mini-dock, flip the bail up against the back of the support platform to allow the plat- form to lie flat.
Note that the right-hand support can be removed to accom- modate an optional wireless module (see Figure 4). To remove the support, slide it upwards until it unlatches from the support platform.
2
