Fujitsu Siemens Computers i Series Fields, Options and Defaults for the Security Menu, Advanced

							S e c u r i t y M e n u
			PhoenixBIOS Setup Utility
	Main	Advanced	Security	Power	Boot	Info	Exit
	Supervisor Password Is:			Clear			Item Specific Help
	User Password Is:			Clear		Press [Enter] key to
	Set Supervisor Password			[Enter]		set Supervisor Password
	Set User Password			[Enter]		to enable any password
	Minimum User Password Length:			[0]		features.
	Password on Boot:			[Disabled]		Then password entry is
	Password on Resume:			[Disabled]		required to enter BIOS
	Boot from Removable Media:			[All]		Setup.
	Floppy Disk Access:			[All]
▲	Hard Disk Security
▲	Owner Information
	Hard Disk Boot Sector:			[Normal]

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/SpaceChange Values Enter Select ▲Sub-Menu

F9 Setup Defaults

F10 Save and Exit

			Figure 12. Security Menu
Table 12: Fields, Options and Defaults for the Security Menu
Menu Field	Options	Default		Description
Supervisor	–—	Clear		A display-only field. Set is displayed when the system supervisor
Password is:				password is set and Clear when it is not.
User Password is:	–—	Clear		A display-only field. Set is displayed when the general user
				password is set, and Clear when it is not.
Set Supervisor	–—	[Enter]		Sets, changes or cancels the Supervisor Password. The Supervisor
Password				Password may be up to seven characters long and must include
				only letters or numbers (no symbols). Passwords are NOT case-
				sensitive. To cancel a password press the Enter key instead of
				entering characters in the Enter New Password field and in the
				Re-enter New Password field. When a Supervisor Password is set
				it must be used to access the BIOS setup utility.
Set User Password	–—	[Enter]		This field can only be accessed if the Supervisor Password is set.
				Sets, changes or cancels the User Password. The User Password
				may be up to seven characters long and must include only letters
				or numbers (no symbols). Passwords are NOT case-sensitive. To
				cancel a password press the Enter key instead of entering characters
				in the Enter New Password field and in the Re-enter New Password
				field. When a User Password is set it must be used to access the
				BIOS setup utility.
Minimum User	–—	[0]
Password Length:

21