Fujitsu Siemens Computers N3510 manual Boot Device Priority Submenu of the Boot Menu, L2 Cach

L i f e B o o k N S e r i e s N o t e b o o k B I O S

Boot Device Priority Submenu of the Boot Menu

The Boot Device Priority Submenu is for setting the order for checking of sources for the operating system.

		Device Priority
	BoBoott Menu			Intel(R
S424040M9AT00
	__ Pre-Boot Execution Environment
TSHITADVD-RAM UJ-831S				Speed:
xx		Boot FloppyDevice Priority
		Hard Disk		L2 Cach
/xx/xx
		Hard CDDisk-ROMDrive Sequence
00h - FFFFh
		PXE
Is:		Clear
		Clear
ord Is:		OK	Cancel	Total
				Slo
:		Clear		Slo

Figure 18. Boot Device Priority Submenu

■Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

■A bootable CD-ROM has either a floppy disk format or a hard drive format. When the bootable CD- ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is present since the C: designator is always reserved for the internal hard drive. The boot sequence ignores the new drive designations, however, your application software will use the new designations.

Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu

Menu Field	Description
+Floppy Disk Drive	The boot selections determine the order in which the BIOS searches for the operating system during a startup
	sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and then press the
+Hard Disk Drive	[PgUp] or [PgDn] key to change the order number.
CD-ROM Drive	NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten,
PXE	depending upon your operating environment.

18