20
LifeBook S Series Notebook BIOS
SECURITY MENU – SETTING THE SECURITY FEATURES

The Security menu allows you to set up the data security

features of your notebook to fit your operating needs and

to view the current data security configuration. Follow the

instructions for Navigating Through the Setup Utility to

make any changes. (See Navigating Through the Setup

Utility on page2 for more information)

The following tables show the names of the menu fields

for the Security menu and its submenus, the options for

each field, the default settings and a description of the

field's function and any special information needed to

help understand the field's use. The default condition is

no passwords required and no write protection.
Figure 12. Security Menu
Entering a password incorrectly three times
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled] to be displayed. If
this happens, restart the computer by
turning off and on the power with the
power switch and use the correct
password on reboot.
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access
to your secured functions and data.
If you make an error when re-entering
the password a [Warning] will be dis-
played on the screen. To try again press
the [Enter] key and then retype the pass-
word. Press the [Esc] key to abort the
password setting process.
If the Password on Boot is Disabled you
will not have to type your password
upon resuming the system from the Sus-
pend or Save-to-Disk modes.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main Advanced Security Boot Info Exit
Item Specific Help
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Then password entry is
required to enter BIOS
Setup.
PhoenixBIOS Setup Utility
▲ ▲
Supervisor Password Is: Clear
User Password Is: Clear
Set Supervisor Password [Enter]
Set User Password [Enter]
Minimum User Password Length: [0]
Password on Boot: [Disabled]
On Automatic Wake up: [Disabled]
KB Lock on Resume: [Disabled]
Boot from Removable Media: [All]
Hard Disk Security
Owner Information
Security Panel On Resume: [Enabled]