Menu Field, Options, Default | Fujitsu Siemens Computers S2110

					M a i n M e n u

Table 1: Fields, Options and Defaults for the Main Menu

Menu Field	Options		Default	Description


Primary	Selects Primary		The product # of	Display the type of device on this ATA/ATAPI interface, if there is
Master:	Master submenu		the Hard Drive	one. Pressing the Enter key selects the Primary Master submenu
				allowing additional device configuration options for this interface.

Secondary	Selects Secondary		The product # of	Display the type of device on this ATA/ATAPI interface, if there is
Master:	Master submenu		the CD drive	one. Pressing the Enter key selects the Secondary Master submenu
				allowing additional device configuration options for this interface.

Language:	■	English (US)	[English (US)]	The default setting differs between the US/European and the
	■	Japanese (JP)		Japanese model. Selects the display language for the BIOS.

5

Image 5

Fujitsu Siemens Computers S2110 Fields, Options and Defaults for the Main Menu, Menu Field, Description, M a i n M e n u

Contents

Fujitsu LifeBook S Series BIOS GuideLifeBook S Series Model S2110 F U J I T S U C O M P U T E R S Y S T E M S Entering the BIOS Setup Utility BIOS SETUP UTILITYNavigating Through the Setup Utility S Series BIOS M a i n M e n u Warning! Error message Continue Table 1 Fields, Options and Defaults for the Main Menu MAIN MENU - SETTING STANDARD SYSTEM PARAMETERS Default Auto Primary Master Submenu of the Main Menu A bootable DVD/CD-ROM may have either a floppy disk or hard drive format. When the bootable DVD/ CD-ROM is used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format DVD/CD-ROM is used, the DVD/CD-ROM becomes Drive A. The DVD/CD-ROM will only take drive C hard drive format if the internal hard drive is not present or is disabled. The bootable DVD/ CD-ROM can never use a C designation if a formatted internal hard drive is present since the C designa- tor is always reserved for the internal hard drive.The boot sequence ignores the new drive designations, however, your application software will use the new designations Secondary Master Submenu of the Main Menu Exiting from Main Menu ADVANCED MENU - SETTING DEVICE FEATURE CONTROLS A d v a n c e d M e n u Table 4 Fields, Options and Defaults for the Advanced Menu Enabled Serial/Parallel Port Configuration Submenu of the Advanced Menu Default Power Savings Keyboard/Mouse Features Submenu of the Advanced MenuInternal Pointing Device Auto Disabled PhoenixBIOS Setup Utility Main Video Features Submenu of the Advanced Menu Internal Device Configurations Submenu of the Advanced Menu USB Features USB Features Submenu of the Advanced MenuThe feature is disabled Figure 9. USB Features Submenu Disabled Miscellaneous Configurations Submenu of the Advanced Menu Event Logging Submenu of the Advanced Menu Figure 12. Security Menu SECURITY MENU - SETTING THE SECURITY FEATURES S e c u r i t y M e n u Table 12 Fields, Options and Defaults for the Security Menu Advanced Hard Disk Security Submenu of the Security Menu Exiting from the Security Menu Owner Information Submenu of the Security MenuESC Exit Enter Table 15 Fields, Options and Defaults for the Boot Menu BOOT MENU - SELECTING THE OPERATING SYSTEM SOURCE Exiting from Boot Menu The Boot Device Priority Submenu of the Boot Menu INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION Table 17 Fields, Options and Defaults for the Info Menu Table 18 Fields, Options and Defaults for the Exit Menu EXIT MENU - LEAVING THE SETUP UTILITYBoot Exit Saving Changes Exit Discarding Changes Load Setup Defaults