Fujitsu Siemens Computers S2110 Primary Master Submenu of the Main Menu, Auto, Enter, Menu Field

L i f e B o o k S S e r i e s N o t e b o o k B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA devices are installed.

Note that actual hard drive label shown may vary. Depending on the drive type, information such as cylin- ders, heads and sectors may also be displayed.

PhoenixBIOS Setup Utility

Main

Primary Master [TOSHIBA MK4025GAS-(PM)]		Item Specific Help
Type:	[Auto]	Select ATA/ATAPI drive
LBA Format		installed here.
Total Sectors:	78140160
Maximum Capacity:	40008MB	[Auto]
		The BIOS auto-types the
Multi-Sector Transfers:	[16 Sectors]	drive on boot time.
LBA Mode Control:	[Enabled]
Transfer Mode:	[Multiword DMA 2]	[None]
Ultra DMA Mode:	[Disabled]	The drive is disabled.

F1	Help	Select	Item
ESC	Exit	Select	Menu

-/Space	Change	Values
Enter	Select	▲ Sub-Menu

F9 Setup Defaults

F10 Save and Exit

Figure 2. Primary Master Submenu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Select Auto to have the type of Serial or Parallel ATA device auto-
	■	None		matically identified by the BIOS at POST. If None is selected, the fol-
				lowing Set-up items do not appear.
LBA Format				Logical Block Addressing (LBA)
Total Sectors:	---		---	The total number of sectors on your hard disk
Maximum	---		---	The maximum capacity of your hard disk
Capacity:
Multi-Sector	■	Disabled	[16 Sectors]	This option cannot be changed when Auto is selected.
Transfers:	■	2 Sectors
	■	4 Sectors
	■	8 Sectors
	■	16 Sectors
LBA Mode Control:	■	Disabled	[Enabled]	Enables or disables logical Block Addressing in place of Cylinder,
	■	Enabled		Head, Sector addressing. This option cannot be changed when Auto
				is selected.

6