MYRICA V40-1
32 - English A26361-K1070-Z120-1-M119, edition 1
PIP mode (Picture in Picture) The LCD TV can also display a sub-video signal in addition to the main video signal. The sub-video
signal is shown as a "PIP display" in a window on the main display.
The following buttons of the remote control are available for setting the PIP mode.
► Press the ON/OFF button to activate the PIP mode.
► Press the SOURCE button to select the source from which the signal for the PIP display i s to
come.
► Press the SIZE button to set the size of the PIP display.
► Press the POSITION button to set the position of the PIP display.
► Press the SWAP button to exchange the size and position of the main display with those of t he
PIP display.
► Press the POP button to display the main display and the PIP display in the same s ize next to
each other.
► If a TV signal is displayed in the PIP display, you change to the next programme in the
programme list with the PR+ button, and to the previous programme in the programme list with
the PR- button.
Depending on which source the signal for the main display comes from, you can use certain sources
for the signal of the PIP display.
The following combination options are available to you:
Signal
sources Main display
TV AV SV SCART 1 SCART 2 VGA DVI YPbPr
TV
AV - -
SV - -
SCART 1 -
SCART 2 -
VGA - - -
DVI - - -
PIP display
YPbPr - - -