Fujitsu Siemens Computers V40-1 Important notes

2 - English A26361-K1070-Z120-1-M119, edition 1

The meanings of the symbols and fonts used in this manual are as follows:

Pay particular attention to text marked with this symbol. Failure to observe this warning

endangers your life, destroys the device, or may lead to loss of data.

Supplementary information, remarks, and tips follow this symbol.

► Text which follows this symbol describes activities that must be performed in the order shown.

"Quotation marks" indicate names of chapters or terms.

Texts in italics indicate filenames and menu items.

Important notes

In this chapter you will find information regarding safety which is essential to take note of with your

LCD TV.

Avoid still images on the screen for longer periods, e.g. still images from videos, sender

label etc. (maximum of 1 hour).

This pictures may remain visible! Also avoid longer operation in a picture mode in which

black bars are visible. These black bars can also remain visible.

This product from Fujitsu Siemens Computers contains intellectual property of third

parties. Any tampering with or modification of the product will void the warranty and may

lead to legal prosecution to the full extent of the law.

This device complies with the relevant safety regulations for data processing equipment. If you have

any questions, contact your sales outlet or our help desk.

● The display surface of the LCD TV is sensitive to pressure and scratches. You should therefore

be careful with the display surface so as to avoid lasting damage (Newton rings, scratches).

● If the device is brought into the installation site from a cold environment, condensation can

form. Before operating the device, wait until it is absolutely dry and has reached approximately

the same temperature as the installation site.

● During installation and before operating the device, please observe the instructions on

environmental conditions in the "Technical data" chapter as well as the instructions in the

"Preparing for use" chapter.

● To ensure sufficient ventilation, the intake and exhaust air openings of the device must never

be blocked.

● The device automatically sets itself to the correct voltage within the range from 100 V to 240 V.

Ensure that the local mains voltage lies within these limits.

● Ensure that the power socket on the device or the earthed mains outlet is freely accessible.