Still Sleep, Plasma Display | FUNAI 6842PE instruction

STILL

POWER

VOL

MUTE

SCREEN MODE

STILL

INPUT SELECT

DISPLAY

You can freeze the image displayed on the screen.

1 Press the STILL button.

The still mode turns on, and the image dis- played on the screen is frozen.

NOTE:

•When the still mode is on, the message "Still" slowly flashes on the screen.

•When the still mode is on, the audio is muted.

INPUT SELECT

DISPLAY

MENUPREVIOUS

SLEEP

You can select the sleep timer.

1 Press the SLEEP button.

The sleep timer is displayed on the screen.

NOTE:

•If the sleep timer is activated, the remaining time is displayed on the screen.

If not activated, “0 minutes” is displayed.

2 Press the SLEEP button to set the time.

• You cannot turn the still mode on when there is no	The SLEEP button switches between the
video signal or when switching between video sig-	times.
nals.	0 minutes	10 minutes	90 minutes
	0 minutes	10 minutes	90 minutes
2 Press the STILL button again to turn the still
mode off.

	NOTE:	The timer starts counting down after the mes-
	• You can also press the INPUT SELECT,	The timer starts counting down after the mes-
	• You can also press the INPUT SELECT,	sage displaying the set time disappears (after
	DISPLAY, SLEEP, VOL K(up) / L(down), MUTE,	sage displaying the set time disappears (after
	DISPLAY, SLEEP, VOL K(up) / L(down), MUTE,	approximately 4 seconds).
	SCREEN MODE or MENU buttons to turn the still	approximately 4 seconds).
	SCREEN MODE or MENU buttons to turn the still	NOTE:
	mode off.	NOTE:
		• The remaining time displayed for the sleep timer
		changes in steps of 1 minute.
		• To change the set time, repeat the above proce-
		dure.

OPERATING