FUNAI BLC320EM9 owner manual 5Still Mode, 5Switching Each Input Mode, 5Switching Audio Mode

WATCHING TV

5Still Mode

You can pause the image shown on the TV screen.

Press [STILL] to pause the image shown on the TV screen.

Still

•The sound output will not be paused.

•If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted.

•The still function will be released after 5 minutes.

To cancel still mode, press any button except [POWER].

5Switching Each Input Mode

You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit.

Press [INPUT SELECT] or [CH. K] repeatedly to cycle through the input modes.

DTV/TV channel

5Switching Audio Mode

This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.

TV

1Press [AUDIO ] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.

6

SAP / STEREO

When all audio are available

SAP / STEREO SAP / MONO

SAP / STEREO

When stereo and monaural audio are available

MONO / STEREOMONO / STEREO

When SAP and monaural audio are available

SAP / MONO SAP / MONO

When only monaural audio is available

	MONO
	(Cannot be switched)
STEREO	: Outputs stereo-audio
SAP	: Outputs second audio program
MONO	: Outputs mono-audio

or

or

Video1

Video2

Component1

Component2

HDMI1

HDMI2

DTV

1 Press [AUDIO ] to display the currently selected

language and the number of available languages.

6-1

English 1/3

2 Press [AUDIO ] repeatedly to cycle through the

available audio languages.

•Pressing [CH. L] reverses the direction of the input modes.

•To use the video or S-video input jack of VIDEO1 on the unit, select “Video1”.

•To use the video or S-video input jack of VIDEO2 on the unit, select “Video2”.

•To use the component video input jacks of COMPONENT1 on the unit, select “Component1”.

•To use the component video input jacks of COMPONENT2 on the unit, select “Component2”.

•To use the HDMI1 input jack on the unit, select “HDMI1”.

•To use the HDMI2 input jack on the unit, select “HDMI2”.

• Available languages differ depending on the

broadcast. “Other” is displayed when the audio

language cannot be acquired, or the acquired

languages are other than English, Spanish or French.

Note:

•Pressing [AUDIO ] does not control external audio devices.

•The information display will automatically disappear in a few seconds.

16

EN