FUNAI CR130DR8 owner manual B. MPAA Rating, C. Change Password, enter the new 4-digit password

B. MPAA Rating

MPAA Rating is the rating system created by MPAA (Motion Picture Association of America).

4Use [CH K / L] to select “MPAA RATING”, then press [VOL X].

	e.g.) digital TV mode
CH		- V - CHIP SETUP -
or		TV RATING
CH		MPAA RATING
		DOWNLOADABLE RATING
		CHANGE PASSWORD

VOL

5Use [CH K / L], then press [VOL X] repeatedly to change the setting.

CH	G	[VIEW]
or
	PG	[VIEW]
CH	PG-13	[VIEW]
	R	[BLOCK]
	NC-17	[BLOCK]
	X	[BLOCK]
VOL
Rating	Category

GGeneral audience

PG	Parental guidance suggested
PG-13	Unsuitable for children under 13
R	Restricted; under 17 requires accompanying
	parent or adult guardian
NC-17	No one under 17 admitted

XMature audience only

6Press [MENU] to exit.

MENU

C. Change Password INTRODUCTION

Although the default code “0000” is supplied with the unit, you can set your own password.

			e.g.) digital TV mode			CONNECTION
4 Use [CH K / L] to select “CHANGE PASSWORD”,
then press [VOL X].
	CH			- V - CHIP SETUP -
	or		TV RATING
	CH		MPAA RATING
			DOWNLOADABLE RATING			INITIAL
			CHANGE PASSWORD
	VOL					SETTING
5 Press [the Number buttons] on the remote control to						WATCHING
enter the new 4-digit password.
• Enter password again in “CONFIRM PASSWORD”
space.						TV
1	2	3	NEW PASSWORD
4	5	6	_ _ _	_
						OPTIONAL
7	8	9	CONFIRM PASSWORD
				_ _ _	_
	0					SETTING

6Press [MENU] to exit.

MENU	TROUBLESHOOTING
Note:
• Make sure new password and confirm password must be
exactly the same. If they are different, the space is cleared
for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs. If you forget the
password, unplug the power cord for 10 seconds to restore	INFORMATION
the password to 0000.

21

EN