Error Messages, ERR=xxxx | Orion LBI-38888K instruction

Message trunked group calls and individual calls will be answered back in the mode they were received, assuming the call or hang time is still active. Individual, phone, all and emergency calls will be transmitted clear if digital mode is disabled or inoperative.

1.If receiving an analog message trunked call, the radio will respond in analog mode during the hang time on the working channel.

2.If receiving an analog I-Call, the radio will respond in analog mode during the hang time.

3.When using the "WHC" feature to respond to an I-Call (after the hang time has expired), the call will be transmitted in the mode defined by the system mode as programmed for the current system if the ID being called is not in the I-Call list. If the ID is in the I-Call list, then the call will be transmitted as defined by the I-Call mode programmed in the list for that ID.

DTMF

The overdial and hot keypad features for transmitting DTMF tones are not available while in the Aegis Digital Mode or ProVoice Digital Mode.

ERROR Messages

If any of the following error messages are displayed, the radio was either programmed incorrectly or needs servicing:

DSP ERR

ERR=xxxx

Power Up Only

DSP ERR

DIGV ERR

If the Aegis or ProVoice circuit board is not responding, correctly, one of the following error messages will be displayed and the radio needs servicing:

HARDWARE

ERR= 3X

3X will be a number between 30 and 38

66

Image 66

Orion LBI-38888K manual Error Messages, ERR=xxxx

Contents

Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents Interference To Vehicular Electronic Systems Safety InformationList of the possible hazards are Explosive Atmospheres Dynamite Blasting Caps Introduction User Interface Orion Mobile Radio System Model Front Panel Power ON-OFF Volume Knob ControlsSYSTEM/GROUP Channel Knob Scan ON/OFF IndicatorsRamp Control Scan ADD/DELETE Keypad Orion System Model Keypad Standard Keycap Configuration Optional Keycap ConfigurationKey Descriptions Entry see Selection Mode Rules Primary Functions Quick Access ALM Display Radio Status Icons Messages Message Name Description TX Data WHC=1 FIX List Spkr on System Busy Trunked Mode only Autokey Trunked Mode onlyCall Queued Trunked Mode only Alert Tones Dual Control Switching Call Denied Trunked Mode onlyCarrier Control Timer Operation Selection Mode Rules Turning on the Radio Direct Access U T H Menu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Feature Encryption Display Feature Encryption Data StreamSerial Number ROM 12 Hex Digits Example Features Enabled Number Fields BIT Fields Possible Features SYSTEM/GROUP/CHANNEL Selection System Selection Group And Channel Selection Trunked Mode Operation Receiving a CallSending a Call Conventional Failsoft Emergency OperationReceiving An Emergency Call System Scan Operation Declaring An Emergency CallWide Area System Scan ProSoundTM ProScanTM Priority System Scan When Wide Area System Scan Is EnabledWhen ProSound/ProScan Is Enabled Menu Selection Group Scan Operation Adding Groups To a Scan List Deleting Groups From a Scan List Nuisance Delete Turning Scan onPriority Group Scanning Individual Calls Turning Scan OFFReceiving and Responding To An Individual Call Page Scat Operation Sending An Individual Call Receiving a Telephone Interconnect Call Trunked Mode Only Sending a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Mobile Data Displays Data OFF Operation Data On Operation Scan Lockout Mode Exiting Data Calls Data Lockout Mode STATUS/MESSAGE Operation Status Operation Edacs Conventional P1 Scan Message Operation Conventional Mode Operation Dynamic Regroup OperationEmergency Operation Receiving a Call Using 5-Tone Signalling for Emergency Declaration Tone Encode Transmission Scanning Conventional Channels Adding Channels To a Scan List Deleting Channels From a Scan List Turning Scan on Turning Scan OFF Squelch Adjust Noise Blanker Operation Type 99 Decode Conventional Only Menu Selection Direct Mode Operation Conventional System Only Trunked or Conventional Mode Operation SIREN/LIGHT OperationVoice Modes AEGIS/ProVoice Digital Mode YesClear Modes Error Messages ERR=xxxxPage Transferring Keys Into The Radio Displaying The Currently Used Cryptographic Key Number Key Zero Private Operation Receiving An Encrypted CallTransmitting An Encrypted Call Scanned Group Calls Conventional Operation Outside Address Dual Control Operation Switching ControlControl Switching Modes Channel Guard Slaved Mode Operation Independent Mode OperationSiren And Light Control Changing Selected Radio Multiple Radio OperationDual Control Audio Shared Control Unit Display Modes Audio Summed First Come First Serve DisplayAudio Modes Audio First Come First Serve Macro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary Controller Group Or Subfleet Group Scan Individual Call QueueingSite System Inter Talk-aroundTelephone Connect Operators Radio Setup Radio Type Frequency Band Operators Name Emergency Group Warranty Emergency Numbers Operating Tips