13
i
Used to call individual or make an all-call by selecting the
individual call function. See Individual Calls for details.
E This key function is used to declare emergencies.
ALM Toggles the external alarm ON/OFF. The external alarm is
used to indicate the radio is receiving an Individual Call.
Press the key once to enable external alarm and press again
to disable external alarm.
SG1-SG5 Corresponds to five (5) pre-programmed System/Groups.
Pressing a key programmed for SG1 would switch the radio
to the pre-programmed System/Group 1. Pressing a key
programmed for SG2 would switch the radio to the pre-
programmed System/Group 2, etc.
WAIL, YLP,
RST, SL1-
SL8
The WAIL and YLP (Yelp) keys are designed to control an
optional Siren package. The SL1-SL8 (Siren/Light) keys
are designed to control an optional Siren/Light package.
The RST (Reset) key is used to turn all sirens and lights
OFF.
SPK This key function is used to toggle the external speaker
ON/OFF.
STO-ST9 The status 0-9 keys are used to send pre-programmed status
message to the EDACS site.
PVT Enables or disables Private Mode for the System/Group
displayed. See the PRIVATE OPERATION section.
KEY Displays the Encrypted Keys. This selects the DISP KEY
operation from the menu functions.
G* This key function is used in Conventional Mode to send
G-STAR emergency signalling.
PA This key function enables and disables the Public Address
feature.
# DTMF keypad function.
1-9 Keypad numbers.
* DTMF Keypad function.
Primary Functions (Quick Access)
The secondary function of the k button is to toggle the keypad buttons
between their primary function and their sec ondary function. When the
secondary keypad is active, i.e. entering phone digits for an interconnect
call, the k button can be used to toggle the keypad buttons back to their
primary function, perform a task (siren/light enable), and then toggle back