42
The radio will monitor for Agency and Fleet calls which correspond to the
Agency and Fleet associated with the Priority 1 and Priority 2 groups.
Priority Agency and Fleet calls will be indicated by displaying AGENCY
or FLEET on the System line of the display and associated Priority 1 or 2
group on the Group line of the display.
Turning Scan OFF
Toggle scan operation OFF by pressing k. The radio will resume
operation on the selected group.
INDIVIDUAL CALLS
Receiving and Responding To An Individual Call
When the radio receives an individual call (a call directed only to the user's
radio), it unmutes on the assigned working channel and turns on the BSY
indicator. Line one shows ID followed by the logical ID number of the unit
sending the message, or the associated name if the ID number is found in
the individual call list. The individual call indicator display *INDV* is
displayed on line two. The radio can be programmed to ring when an
individual call is received. If enabled, the ring begins five seconds after the
caller unkeys and will continue until the PTT button, the c button, or
i is pressed.
Hookswitch functions the same as c key in I-CALL, phone call, and
menu modes.
If a response is made to the call prior to the programmed call-back time-out,
the call will automatically be directed to the originating unit. If a response is
not made before the call-back time-out, the radio will return to normal
receive mode, but * WHC * will be displayed. If the caller's ID is not
received, UNKNOWN will display for the duration of the call and there
will be no call-back hangtime.
To respond after the call-back time-out, press the i key. The radio's
display will show the callers ID on the first line and WHCI=1 on the second
line. Pressing the PTT button at this point will initiate an individual call
back to the original caller. (If the last call was a group call, the display will
show WHCG=1. Pressing the PTT button will place the call as an
individual call.)
NOTE