15
• indicates selected group or channel is in scan list.
• indicates selected group or channel is programmed as
Priority 1 in scan list.
• indicates selected group or channel is programmed as
Priority 2 in scan list.
• indicates conventional channel enabled with Channel
Guard function.
• indicates the EDACS system is in failsoft mode (if
enabled through programming).
• indicates Type 99 Decode is enabled on a conventional
channel.
MESSAGES
During radio operation, various messages are displayed on either line one or
line two. Typical messages include control channel status information, such
as system busy or call denied, or messages associated with the radio's
operation, (i.e. volume adjust). These messages are described as follows:
MESSAGE NAME DESCRIPTION
QUEUED Call Queued Trunked mode only. Indicates the system has
placed the call in a request queue.
SYS BUSY System Busy Trunked mode only. Indicates the system is
busy, no channels are currently available, the
queue is full or an individual call is being
attempted to a radio that is currently
transmitting.
DENIED Call Denied Trunked mode only. Indicates the radio is not
authorized to operate on the selected system.
CC SCAN Control Channel Scan Trunked mode only. Indicates the control
channel is lost and the radio has entered the
Control Channel Scan mode to search for the
control channel.
WA SCAN Wide Area Scan Trunked mode only. Indicates the control
channel is lost and radio has entered the Wide
Area Scan mode to search for a new system
(if enabled through programming).
TALKARND Talk-around Conventional mode only. Indicates the radio
is operating on conventional channels in talk-
around mode (no repeater).
*RXEMER* Receive Emergency Trunked mode only. Indicates an emergency
call is being received. This message will be
flashing on line two.
*TXEMER* Transmit Emergency Trunked mode only. Indicates an emergency
call has been transmitted. This message will
be flashing on line two.