Feature Encryption Display | Orion LBI-38888K guide

FEATURE ENCRYPTION DISPLAY

Feature Encryption Display is available through the menu function and, if programmed, appears in the menu as "FEATURES." This data indicates current features programmed into the radio as well as information required to add features to the radio. This feature applies to 512K RAM radios only.

Once the feature has been accessed, all normal menu functions work. The user can scroll up or down through all of the entries.

Feature Encryption Display provides the ability to view, in the order displayed, the following:

•Serial number ROM data - serial number of the ROM

•Feature encryption data stream - used to enable features

•Number Fields - defines limits

•Features enabled - displays bit fields of enabled features

Serial Number ROM (12 Hex Digits) Example:

When the user wants to enable a feature in his radio, he will need to call M/A-COM. They will ask for the ROM serial number. The serial number shown here is for example only.

Feature Encryption Data Stream

Example:

These data streams define the features the user has enabled in his radio and are required by M/A-COM to enable other features. The data streams shown here are for example only. Note: There are three displays: FD1, FD2, FD3. All three are required.

29

Image 29

Orion LBI-38888K manual Feature Encryption Display, Serial Number ROM 12 Hex Digits Example, Feature Encryption Data Stream

Contents

Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents List of the possible hazards are Explosive Atmospheres Safety InformationInterference To Vehicular Electronic Systems Dynamite Blasting Caps User Interface Introduction Orion Mobile Radio System Model Front Panel SYSTEM/GROUP Channel Knob Power ON-OFF Volume KnobControls Ramp Control IndicatorsScan ON/OFF Scan ADD/DELETE Orion System Model Keypad Keypad Key Descriptions Standard Keycap ConfigurationOptional Keycap Configuration Entry see Selection Mode Rules ALM Primary Functions Quick Access Radio Status Icons Display Message Name Description Messages TX Data WHC=1 FIX List Spkr on Call Queued Trunked Mode only Autokey Trunked Mode onlySystem Busy Trunked Mode only Alert Tones Carrier Control Timer Call Denied Trunked Mode onlyDual Control Switching Operation Turning on the Radio Selection Mode Rules U T H Direct Access Menu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Serial Number ROM 12 Hex Digits Example Feature Encryption DisplayFeature Encryption Data Stream Number Fields Features Enabled BIT Fields Possible Features System Selection SYSTEM/GROUP/CHANNEL Selection Group And Channel Selection Sending a Call Trunked Mode OperationReceiving a Call Receiving An Emergency Call Conventional FailsoftEmergency Operation Wide Area System Scan System Scan OperationDeclaring An Emergency Call ProScanTM ProSoundTM When ProSound/ProScan Is Enabled When Wide Area System Scan Is EnabledPriority System Scan Menu Selection Group Scan Operation Deleting Groups From a Scan List Adding Groups To a Scan List Priority Group Scanning Nuisance DeleteTurning Scan on Receiving and Responding To An Individual Call Individual CallsTurning Scan OFF Page Sending An Individual Call Scat Operation Telephone Interconnect Calls Receiving a Telephone Interconnect Call Trunked Mode OnlySending a Telephone Interconnect Call Trunked Mode Only Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Displays Mobile Data Data On Operation Data OFF Operation Exiting Data Calls Scan Lockout Mode STATUS/MESSAGE Operation Data Lockout Mode Status Operation Message Operation Edacs Conventional P1 Scan Emergency Operation Conventional Mode OperationDynamic Regroup Operation Receiving a Call Tone Encode Transmission Using 5-Tone Signalling for Emergency Declaration Scanning Conventional Channels Deleting Channels From a Scan List Adding Channels To a Scan List Turning Scan OFF Turning Scan on Squelch Adjust Type 99 Decode Conventional Only Noise Blanker Operation Menu Selection Direct Mode Operation Conventional System Only Voice Modes Trunked or Conventional Mode OperationSIREN/LIGHT Operation Clear Modes AEGIS/ProVoice Digital ModeYes ERR=xxxx Error MessagesPage Displaying The Currently Used Cryptographic Key Number Transferring Keys Into The Radio Transmitting An Encrypted Call Key ZeroPrivate Operation Receiving An Encrypted Call Conventional Operation Outside Address Scanned Group Calls Control Switching Modes Switching ControlDual Control Operation Channel Guard Siren And Light Control Slaved Mode OperationIndependent Mode Operation Dual Control Audio Multiple Radio OperationChanging Selected Radio Shared Control Unit Display Modes Audio Modes First Come First Serve DisplayAudio Summed Audio First Come First Serve Macro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary Site Group Or Subfleet Group Scan Individual Call QueueingController System Telephone Talk-aroundInter Connect Radio Type Frequency Band Operators Name Emergency Group Operators Radio Setup Warranty Operating Tips Emergency Numbers