49
Data OFF Operation
The radio can be placed in the data disable state by any of the following
methods. When the data state is disabled, the control unit displays "DATA
OFF" on the top line. An ongoing data call is allowed to complete except in
the case of declaring an emergency.
•Removing the microphone from the hookswitch (hookswitch option
must be enabled by pre-programming).
•Declaring an emergency (not to be used unless an actual emergency
condition exists). Alert tone will sound.
•Pressing the o button (System Model) or O(Scan Model)
(pre-programmed). Alert tone will sound.
•Selecting the function using the m button (pre-programmed).
•Pressing the ND button (System Model Only) (pre-programmed).
Data On Operation
The data state is enabled by one of the following (depending on how it was
disabled). "DATA ON" will be displayed top line of display for 2 seconds
then the display returns to normal.
•Replacing the microphone into the hookswitch (going on-hook). Only
valid if the data OFF operation was entered by removing the
microphone from the hookswitch (going OFF-hook).
•Pressing the ND key toggles data state on or OFF.
•Clearing an emergency but valid only if emergency cau sed data OF F
operation.