41
Nuisance Delete
A group can also be deleted from the scan list, if it is not the currently
selected group, by pressing > during scan operation while the radio is
displaying the unwanted group. The group will be deleted from the system's
group scan list in the same manner as if done using the steps above.
Deletions done in this manner will not remain deleted if the radio is turned
OFF and then back ON.
Turning Scan ON
1. Toggle scan operation by pressing k. The SCAN indicator will turn
on when the radio is scanning.
The k key light will blink when temporarily disabled.
Scanning will stop while microphone is OFF-hook if hookswitch feature
is enabled through programming.
2. When a group on the scan list receives a channel assignment, the radio
unmutes on the assigned channel, BSY indicator comes on and the
received scan group is displayed.
•The radio will continue scanning if a new group is selected when scan
is on.
•Pressing the PTT button when scan is on will cause the radio to
transmit on the displayed group or to the currently selected group
depending on programming.
•Pressing < when scan is on will cause the radio to recall the
scanned group that was last received. This group is recalled for a
period equal to the scan hang time.
Priority Group Scanning
When scan is enabled and the Priority 1 and Priority 2 groups have been
identified, the radio will listen to calls on those groups and the selected
group. While receiving a scanned group call, the radio will continue to
monitor the selected, Priority 1 and Priority 2 groups and will drop the call
if the selected group or other higher priority call becomes active. During a
Priority 2 call the radio will continue to monitor for a Priority 1 group call.
NOTE