23
Line one shows the currently selected item name (XXXXXXXX) from the
list. Line two indicates the list (YYY) that the selection is to be made from
and the number of the selected item (ZZZ) within the list. (In some cases
the information on lines 1 and 2 will be exchanged. Enter the system
selection mode by pressing the S key. If SYSTEM 2 is the current
selection, the display appears as follows:
S O U T H
S Y S = 2
Line one contains the current system name, SOUTH, and line two, SYS = 2,
indicates that selection is from the system list and it is the second system
within the list.
A new system from the list is selected by using the RAMP control , or
. or by directly entering the system number with the numeric keys. The
RAMP control , or . scrolls through the list in increasing and
decreasing order. In the previous example, pressing the RAMP control ,
selects the EAST system as shown in the next display.
E A S T
S Y S = 3
The radio may be programmed to wrap around from one end of a list to the
other end or to stop at the ends.
DIRECT ACCESS
To directly access a selection, enter the corresponding number (i.e. 4)
followed by SEL to activate the selection. The entered number is displayed
on line two as shown below. Line one shows the current list being used for
selection.
S E L S Y S
4