Group Scan Operation | Orion LBI-38888K guide

GROUP SCAN OPERATION

Only Groups that are part of the radio's scan list may be scanned. Groups are added to the scan list on a per system basis by PC Programming, the radio keypad or both, dependent upon programming. This scan list may be changed by the user from the keypad unless programmed otherwise. Each system's group scan list is retained in memory when the radio is turned OFF. The Orion mobile radio may also be programmed to provide Trunked Priority Group Scan capability which operates similar to priority scan in Conventional mode.

The following is a description of PC-Programmable scan features that should be helpful in understanding the Group Scan Operation of the radio:

Scan Hang Time - the delay time the radio waits before resuming scan after the push-to-talk is released or after the carrier has dropped a channel.

TX Select - the group the radio will transmit on while scanning. The radio is programmed to transmit on either the scanned group or the selected group.

Scan List (privileges) - this feature allows or prohibits scan list changes by the user.

P1 Programming - priority group programming is accomplished by one (and only one) of three methods:

1.From the keypad, where the Priority programming is not fixed and does not follow the selected channel.

2.Priority 1 group programming follows the selected channel.

3.Priority 1 group programming is fixed during PC Programming and cannot be changed by the user.

P1 Always Scan - determines if the Priority 1 Group will always be scanned, regardless of the scan state set by the user.

39

Image 39

Orion LBI-38888K manual Group Scan Operation

Contents

Orion Product Specification for CE Marked Equipment Table of Contents Table of Contents Dynamite Blasting Caps Safety InformationList of the possible hazards are Explosive Atmospheres Interference To Vehicular Electronic Systems User Interface Introduction Orion Mobile Radio System Model Front Panel Power ON-OFF Volume Knob ControlsSYSTEM/GROUP Channel Knob Scan ADD/DELETE IndicatorsRamp Control Scan ON/OFF Orion System Model Keypad Keypad Standard Keycap Configuration Optional Keycap ConfigurationKey Descriptions Entry see Selection Mode Rules ALM Primary Functions Quick Access Radio Status Icons Display Message Name Description Messages TX Data WHC=1 FIX List Spkr on Alert Tones Autokey Trunked Mode onlyCall Queued Trunked Mode only System Busy Trunked Mode only Operation Call Denied Trunked Mode onlyCarrier Control Timer Dual Control Switching Turning on the Radio Selection Mode Rules U T H Direct Access Menu N U K L G H T Press SEL Menu Item Information Feature Display Parameter Comment Settings SYS Scan Feature Encryption Display Feature Encryption Data StreamSerial Number ROM 12 Hex Digits Example Number Fields Features Enabled BIT Fields Possible Features System Selection SYSTEM/GROUP/CHANNEL Selection Group And Channel Selection Trunked Mode Operation Receiving a CallSending a Call Conventional Failsoft Emergency OperationReceiving An Emergency Call System Scan Operation Declaring An Emergency CallWide Area System Scan ProScanTM ProSoundTM Menu Selection When Wide Area System Scan Is EnabledWhen ProSound/ProScan Is Enabled Priority System Scan Group Scan Operation Deleting Groups From a Scan List Adding Groups To a Scan List Nuisance Delete Turning Scan onPriority Group Scanning Individual Calls Turning Scan OFFReceiving and Responding To An Individual Call Page Sending An Individual Call Scat Operation Receiving a Telephone Interconnect Call Trunked Mode Only Sending a Telephone Interconnect Call Trunked Mode OnlyTelephone Interconnect Calls Dtmf Overdial/Conventional Mode Telephone Interconnect Programmable Entries Displays Mobile Data Data On Operation Data OFF Operation Exiting Data Calls Scan Lockout Mode STATUS/MESSAGE Operation Data Lockout Mode Status Operation Message Operation Edacs Conventional P1 Scan Conventional Mode Operation Dynamic Regroup OperationEmergency Operation Receiving a Call Tone Encode Transmission Using 5-Tone Signalling for Emergency Declaration Scanning Conventional Channels Deleting Channels From a Scan List Adding Channels To a Scan List Turning Scan OFF Turning Scan on Squelch Adjust Type 99 Decode Conventional Only Noise Blanker Operation Menu Selection Direct Mode Operation Conventional System Only Trunked or Conventional Mode Operation SIREN/LIGHT OperationVoice Modes AEGIS/ProVoice Digital Mode YesClear Modes ERR=xxxx Error MessagesPage Displaying The Currently Used Cryptographic Key Number Transferring Keys Into The Radio Key Zero Private Operation Receiving An Encrypted CallTransmitting An Encrypted Call Conventional Operation Outside Address Scanned Group Calls Channel Guard Switching ControlControl Switching Modes Dual Control Operation Slaved Mode Operation Independent Mode OperationSiren And Light Control Shared Control Unit Display Modes Multiple Radio OperationDual Control Audio Changing Selected Radio Audio First Come First Serve First Come First Serve DisplayAudio Modes Audio Summed Macro KEY Operation Page Keypad Remapping Operating Rules and Regulations Glossary System Group Or Subfleet Group Scan Individual Call QueueingSite Controller Connect Talk-aroundTelephone Inter Radio Type Frequency Band Operators Name Emergency Group Operators Radio Setup Warranty Operating Tips Emergency Numbers