12
S
This key is used to enter the System select mode.
g
This key is used to enter the Group select mode.
o
O
This key function is used to toggle a PC programmable
feature ON and OFF.
DEL Secondary function - used to delete a digit during numeric
entry (see SELECTION MODE RULES).
m
Primary function - accesses the menu list. This is a list of
additional features that are not available directly from the
keypad. See MENU for details.
SELECT Secondary function - activates a selected item within a list.
After the menus list is accessed, select a menu item from
the list via RAMP control , or . and activate it with this key.
Once activated, MENU continues its secondary function for
activating a selected parameter setting until the radio
returns to its normal receive state. This is similar to an
enter key.
s
The Status key permits the transmission of a pre-
programmed status message to an EDACS site.
n
The Message key permits the transmission of a pre-
programmed message to an EDACS site.
c
C
Serves several purposes depending on the operating mode.
In trunked mode, the CLR button exits the current operation
and removes all displays associated with it. The radio and
display then return to the group receive state. In
Conventional mode, pressing this button unmutes the
receiver so activity on the selected channel can be
monitored. When pressed and held for approximately 3
seconds, this button toggles conventional channel decoding
(Channel Guard, Digital Channel Guard, T99) on and OFF
if programmed for the selected channel.
p
Used to place telephone calls through the radio by selecting
the interconnect special call function. See Telephone
Interconnect Calls for details.
d
Used to adjust the current display intensity and the keypad
backlight level.