24
If a mistake is made while entering the number, press the DEL button to
backspace once and correct the entry. If an invalid number is entered, a
short low-pitched tone sounds when SEL is pressed.
To exit the selection mode, press the c button or wait for the time-out. If
the selection mode is cleared while an entry is pending (i.e., numbers are
entered on line 2, but SEL has not been pressed), the entry on line two will
be disregarded and the previous selection will remain active. If the time-out
activates while an entry is pending, the entry on line two will be selected if
it is within the valid range; if it is out of range, the entry on line two will be
disregarded and the previous selection will remain active.
NOTE: While in system, group or channel selection mode, the radio
continues to receive calls normally and continues scanning if it is enabled.
If a call is received during the selection mode process the radio will return
to the normal receive mode display. Continuing with the selection process
will return the display to the same point in the selection process if the
selection mode time out has not yet expired. Any press of the PTT button
during the selection mode process will initiate transmission and exit the
selection mode.
MENU
The menu function accesses features that are not available directly from the
keypad. The order and specific number of menu items available is
configurable through programming. Upon radio power up, the menu item
that is at the beginning of the menu list will always be displayed first.
Subsequent access to the menu function will return the last menu item that
was shown in the display. To enter the menu mode, press m. The RAMP
control , and ., the SEL and the c buttons are used during the
selection process. All of the selection mode rules previously detailed apply
to the menu item selection process with the exception of direct access. The
radio will continue to receive and transmit normally while in the menu
function.
A new item is displayed by using the RAMP control , and . to scroll
through the list in increasing and decreasing order. The displayed menu
item is made active by pressing SEL.