Manuals / Lucent Technologies / Computer Equipment / Network Router

Lucent Technologies 7820-0657-001 Hardware Specifications, Table A-1. DSLPipe DSU specifications

Models: 7820-0657-001

1 34

Page 29

Hardware Specifications	A
Hardware Specifications

Table A-1 lists the DSLPipe DSU specifications.

Table A-1. DSLPipe DSU specifications

Physical connectors	RJ-11 for SDSL WAN
	DB-25 to V.35 connector

Transmission rate	144 Kbps - 2320 Kbps

DSL line code	2B1Q

Line impedance	135 ohms

Dimensions	220mm x 169mm x 40mm

Weight	Approximately 2 lbs (0.9 kg)

Electrical, power input	1A @ 9 to 18 VDC via AC Adapter

Electrical, power consumption	Less than 5 watts

Operating humidity	5% - 95%, noncondensing

Operating temperature	0-50° C

EMC	FCC-15B

Safety	UL

DSLPipe DSU (SDSL) User’s Guide

A-1

Page 29

Image 29

Lucent Technologies 7820-0657-001 manual Hardware Specifications, Table A-1. DSLPipe DSU specifications

Contents

Part Number For software version October DSLPipe DSU SDSLUser’s Guide Copyright 1999 Lucent Technologies. All Rights Reserved Lucent TechnologiesTrademarks Ordering InformationCustomer Service Customer ServiceFinding information and software on the Internet Obtaining technical assistanceOther telephone numbers Priority Technical AssistanceCalling Lucent from outside the United States Obtaining assistance through correspondenceImportant safety instructions Important safety instructionsImportant safety instructions Important safety instructions Important safety instructions Installation ContentsViewing configuration information Hardware SpecificationsPage Introduction Wire gaugeTable 1-1. DSLPipe DSU transmission rate Data Transmission Rate in KbpsDSLPipe DSU configuration DSLPipe DSU featuresDSLPipe DSU features Figure 1-1. Example Using a DSLPipe DSU as CPEDSLPipe DSU architecture Figure 1-2. Example Using a DSLPipe DSU as COEDSLPipe DSU architecture Figure 1-3. DSLPipe DSU architecturePage 4 DSLPipe DSU SDSL User’s Guide InstallationChecking package contents Setting up the DSLPipe DSU Setting up the DSLPipe DSUFigure 2-1. Package contents DC INConfiguring the unit as either CPE or COE Setting the data transmission rateTable 2-1. Data transmission settings DIP SwitchConnecting the cables Connecting the cablesTable 2-2. CPE vs. COE configuration ConfigurationDSLPipe DSU SDSL User’s Guide Figure 2-3. Location of the LED lights in the DSLPipe DSU front panelPage Items you need Viewing configuration informationConnecting serial cable and setting up communications software Terminal type Specify VT100 Connecting serial cable and setting up communications softwareBits per second Specify Data bits Specify Stop bits SpecifyViewing configuration information Viewing configuration informationFigure 3-1. DSLPipe configuration window Table 3-1. Fields in the DSLPipe status windowViewing configuration information Table 3-1. Fields in the DSLPipe status window ContinuedFields DescriptionViewing diagnostic information Viewing diagnostic informationFigure 3-2. Debug Mode window Table 3-1. Fields in the DSLPipe status window ContinuedViewing diagnostic information Table 3-2. Fields in the HDLC Registers listFields DescriptionViewing diagnostic information Table 3-2. Fields in the HDLC Registers list ContinuedFields DescriptionPage Table A-1. DSLPipe DSU specifications Hardware SpecificationsPage Warranties and FCC Regulations Product warrantyOut-of warranty repair Warranty repairFCC Part 15 Notice Warranties and FCC RegulationsWarranties and FCC Regulations IC CS-03 NoticeIC CS-03 Notice