FUNAI CR320IL8 A owner manual 5TV Screen Display Mode, 5Sleep Timer, Letterbox, Zoom

5TV Screen Display Mode

DTV

2 types of display modes can be selected in the digital mode when the broadcasting station is sending 16:9 video signal.

1Press [MENU] to display the main menu.

MENU

2Use [CH K/L] to select “DTV SETUP”, then press [VOL X].

	e.g.) digital TV mode
CH	- TV SETUP -
or	PICTURE
CH	CHANNEL SETUP
	V-CHIP SETUP
	LANGUAGE [ENGLISH]
	CAPTION [OFF]
	DTV SETUP

VOL

3Use [CH K/L] to select “DTV DISPLAY”, then use [VOL X/Y] to switch the desired TV aspect ratio.

CH
	- DTV SETUP -
or
CH	DTV DISPLAY [LETTERBOX]
	DTVCC

VOL or VOL

LETTERBOXZOOM

[LETTERBOX]

Display the digital-supported program in full-screen. Black borders will spread in the upper and lower screen.

[ZOOM]

Enlarge and display the center area of the digital- supported program.

The right and left side of image will be cut off.

4Press [MENU] to exit.

MENU

Note:

•You may not switch the display mode depending on the program.

5Sleep Timer			INTRODUCTION
The sleep timer can be set to automatically turn off the unit after an
incremental period of time.
			CONNECTION
1 Press [SLEEP] to set the sleep timer.
	SLEEP
			INITIAL
		SLEEP OFF
• Sleep timer display appears on the TV screen.			SETTING
2 Press [SLEEP] repeatedly to change the amount of
time until shut off.
			WATCHING
	SLEEP
			TV
		SLEEP 120MIN.
• You can set the unit to turn off after a set period of
	time (from 30 to 120 minutes).		OPTIONAL
• Each press of [SLEEP] will increase the time by 30
	minutes.		SETTING
	for checking by pressing [SLEEP].
• After set up, the sleep timer display can be called up
To Cancel the Sleep Timer
			TROUBLESHOOTING
	• The sleep timer setting display will automatically disappear
Press [SLEEP] repeatedly until “SLEEP OFF“ is displayed
on the TV screen.
	Note:
	in a few seconds.
	• When you disconnect the unit from the AC outlet or when a
	power failure occurs, the sleep timer setting will be canceled.
			INFORMATION

15

EN