OPTIONAL SETTING

5Channel List

Note:

After setting “Auto Channel Scan”, using [CH. K/L] on the remote control skips unavailable programs automatically.

If you connect the cable system directly, contact the CATV installer.

If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled.

Channel settings will be saved even if the power fails.

Even if “Autoscan“ is completed, the channel setting will be lost if the AC power cord is unplugged before turning off the unit by pressing [POWER].

The channels selected here can be skipped when selecting the channels using [CH.K/L].

Those channels can still be selected with [the Number buttons].

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

or

3Use [Cursor K/L] to select “Channel List”, then press [ENTER].

or

Channell

Autoscan

 

Channel List

 

Manual Register

 

Antenna

4Use [Cursor K/L] to select the channel you want to skip, then press [ENTER].

or

Channell Listi

 

 

 

 

Highlight channels for Ch

 

DTV

6

Up/Down key selection.

 

 

27

 

 

 

 

 

 

 

DTV

8

 

 

 

 

9

 

 

 

DTV

48

 

 

 

 

58

 

 

 

DTV

67

Ch Select

 

Watch/Skip

BACK

 

ENTER

Back

 

• The selected channel darkens in the channel list, and it skips when selecting the channels by using [CH. K/L].

• To re-register the skipping channels, use [Cursor K/L] and press [ENTER]. The registered channels will be gray in the channel list, and you can select those channels by using [CH. K/L] again.

• When you skip a major channel, its minor channels are skipped as well.

Note:

• The channel with “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5 Press [SETUP] to exit.

18

EN

Page 18
Image 18
FUNAI ELC320EM9 owner manual 5Channel List, Press Setup to exit, Channel l, Channell Listi, Ch Select