Introduction
Prints NoteszDo not touch the printed surface with adhesive tape, rubber goods or plastic, etc., and do not leave the printed surface in contact with other objects.
It may cause color loss, change of color or color transfer.
zSelect albums with
Other type of sleeves may cause color loss or change of color.
zTo avoid print quality deterioration, do not store prints under the following conditions:
−Locations exposed to direct sunlight
−High temperatures (above 40 °C)
−High humidity
−
zEven if prints are stored avoiding the conditions above, change of color or print quality deterioration may occur.
Ink Cartridge NoteszUse the specified Ink cartridge for the printer.zDo not touch the Ink ribbon or pull it out from the Ink cartridge. The allotted number of sheets of paper may not be printed.
zRotate the screw hole of the Ink cartridge in the direction of the arrow with the screw hole pressed to remove slack of the Ink ribbon and then insert the Ink cartridge.
zConfirm the direction of the Ink cartridge and insert all the way into the Ink cartridge slot.
zDo not reuse the Ink cartridge that has already been consumed.Condensation NoteszIf condensation forms inside the printer, stop using the printer and leave it at ordinary temperatures until the water droplets have evaporated completely. Water droplets will form on the windows of the warm room. These droplets are called condensation. They can form on the printer, the Ink cartridge, the Paper tray, and the paper when transporting these items from cold place to warm place.
zIf condensation forms on the Ink cartridge, the Paper tray or the paper, wipe off the water droplets and allow to reach to room temperature before use.
zWhen transporting the printer, including the Ink cartridge, the Paper tray, and the paper from cold place to warm place, seal them into a plastic bag to avoid condensation. Then allow to reach to ambient temperature before use.
19