FUNAI FDP-100 ‹Problems in printing from the camera:, page, page, used, Symptom, Symptom, progress, be printed, Print fails, Possible cause, Possible cause

		Appendix
Symptom	Possible cause	page
Paper jams occur frequently.	z More than 20 sheets of paper are set in the	25
	Paper tray. Up to 20 sheets of paper can be
	set.
	z The paper creases or warps. Use the flat	-
	paper.
	z Too many sheets of paper are accumulated on
	the print output receptacle (on top of the	-
	Paper tray). Do not allow more than 10 sheets
	of printed paper to be accumulated.
The full picture is printed	z Depending on dimensions of an image, the
with upper/lower parts of the	whole image may not be printed.	35
image cutting off.
The allotted number of	z Turning on and off needlessly may cause the
sheets in the print set cannot	printer to miss printing the allotted number of	-
be printed.	sheets. (When turning on the printer, the Ink
	ribbon is winded a bit for initialization.)
	z Pulling the Ink ribbon out may cause the	-
	printer to miss printing the allotted number of
	sheets.
	z If the paper’s perforated line is torn or bent,	-
	that paper cannot be used for printing.

‹Problems in printing from the camera:

Symptom	Possible cause	page
Print fails.	z The printer is not connected with the camera	28
	correctly. (Use the USB cable supplied with
	the camera)
	z Your camera does not support PictBridge	28
	printing.
	z It may be necessary to switch the camera to	28
	the "PictBridge" mode before connecting to
	the printer.
	z Printing operation is required from the	29
	camera. Refer to the user’s guide of the
	camera.
How to stop printing in	z Stop printing by operation of the camera.	-
progress?
Index print or multiple image	z If the camera does not have such functions as
print function cannot be	Index print or multiple image print, these	-
used.	functions cannot be used on the printer.
Some images are not printed	z Images not supported by the printer are not
in the index-prints.	printed. (Parts of these images remains	-
	blank.)

39